News
Vertical Take Up Machine For Galvanized Wire
Vertical Take Up Machine For Galvanized Wire
Inverted type Take up Machine
·Take-up type: quincunx and inverted type
·Wire diameter: φ2mm~φ4mm
·Driving type: AC, frequency control the speed
·Drum type: V channel
·Wire feeding path: Fall from top center.
·Take-up frequency motor power:3KW,220V 50 HZ
·Pan rotating power(to reach quincunx effect): 0.75KW, frequency motor
·Coil diameter: 600mm...
·Layout: 2 rows
·The frame is made from steel structure, fixed by bolts and nuts. The ladder is placed on machine top, in the middle there is a path for workers, and have protective barrier.
·The drum is made of casting steel, after treatment the hardness HRC 58~62, the drum is fixed on the vertical shaft.
·The wire is falling from top center, the drum is fixed, wire guiding roller is rotating.
·There is wire accumulation device, can be replace the coil without stopping the take-up machine.
